Driveway and Concrete Cleaning Jacksonville, FL
What looks like surface dirt on a Jacksonville driveway is often algae and mold that have rooted into the concrete itself, and the longer it sits, the deeper it goes and the harder it is to remove. Pressure Washing Pros provides driveway cleaning, concrete cleaning, pool deck cleaning, and paver cleaning and sealing across Jacksonville, using commercial grade equipment calibrated to lift staining without etching or scarring the surface underneath.
Get a Free EstimateThe Problem
What’s Really Happening to Your Concrete
Jacksonville’s heat, humidity, and rainfall work against concrete every single day, not just during the rainy season. High humidity and warm temperatures create year round breeding conditions for black algae, mold, and mildew, and oak pollen, pine straw, and organic debris keep feeding that growth between cleanings. UV exposure adds its own damage on top of that, causing surface oxidation and color fading over time.
There’s a structural side to this too, not just cosmetic. Jacksonville’s wet and dry rain cycle drives moisture into porous concrete, and over time that contributes to cracking and surface erosion — concrete that looks far older than it actually is. Algae and mold don’t just sit on top of concrete, they root into it, which is why a garden hose or a quick rinse never touches what’s actually causing the discoloration.
Timing
Why Waiting Makes the Job Bigger, Not Smaller
A dirty driveway isn’t only a curb appeal problem. Algae covered concrete and pavers get genuinely slippery, creating a real fall hazard for family and guests, especially around pool decks and entryways. It’s also one of the more common reasons Jacksonville HOAs issue a curb appeal notice, since stained concrete is visible from the street in a way few other maintenance issues are. The buildup itself compounds over time — staining that would rinse away easily after three months can take real pre-treatment and dwell time after two years.
What We Fix
Common Problems We Solve
Rust and mineral staining from irrigation and well water is especially common in newer Nocatee and 32259 area homes. Don’t see your issue listed? Call us — we’ll confirm we can help.
Pool Decks & Patios
Pool Deck and Patio Cleaning
Pool decks and patios face the same algae and mold problems as driveways, with the added issue of standing water and constant moisture keeping the surface wet longer between cleanings. Slippery buildup around a pool is a real safety issue, not just an appearance one, since these are barefoot, high traffic areas. We pressure wash pool decks and patios with the same calibrated approach used on driveways, adjusted for the surface material, whether that’s stamped concrete, pavers, or natural stone.
Pavers
Paver Cleaning and Sealing
Pavers develop their own specific problems over time: weeds and grass growing up through the joints, sand loss between pavers, and a faded, dull look as the surface ages and UV exposure takes its toll. Cleaning restores the paver’s original color and lifts embedded grime, but cleaning alone doesn’t protect against the next round of staining.
Sealing is what makes cleaning last. A quality sealer creates a protective barrier against moisture intrusion, UV damage, and future organic growth, which means pavers stay cleaner longer between professional cleanings and hold their color instead of fading again within a year. We can add sealing as part of the same visit as a paver cleaning — worth discussing during your estimate if your pavers haven’t been sealed before or the existing seal has worn off.
How We Work
Equipment We Use
Driveway and concrete cleaning uses true pressure washing, typically in the 1,500 to 4,000 PSI range, since concrete, brick, and pavers are dense enough to handle direct force, unlike siding or roofing. The real difference between a professional result and a DIY attempt usually isn’t the pressure washer itself — it’s the surface cleaner. A rotary surface cleaner distributes water evenly across a flat surface using multiple spinning nozzles, which is what produces a uniform, streak free result. A handheld wand, even at the same PSI, tends to leave overlapping arcs and streak marks on large flat areas like driveways and pool decks, since even, consistent coverage by hand is difficult to maintain over a large surface. For oil stains and rust, we use targeted degreasers and rust treatments as a pre-treatment step, not just water pressure alone.
Setting Expectations
Being Honest About What Pressure Washing Can and Can’t Do
Pressure washing will significantly improve the appearance of concrete, but it isn’t a guaranteed oil stain removal service. Fresh or light oil stains typically lift well with degreaser and pressure. Older, deeply set oil stains that have soaked into the porous concrete over months or years may lighten significantly but leave a faint shadow that cleaning alone can’t fully erase. We’ll tell you honestly what to expect on a specific stain during your estimate, rather than promise a result we can’t guarantee once the work is already paid for.
Will pressure washing remove oil stains from my driveway?
It depends on the stain. Fresh or moderate oil stains typically respond well to degreaser and pressure washing. Older, deeply set stains that have soaked into the concrete may lighten substantially but aren’t always fully removable, since the oil has penetrated below the surface. We assess the specific stain during your estimate rather than guarantee a result before we’ve seen it.
Our Process
Our Driveway and Concrete Cleaning Process
-
01
Free On-Site Estimate
We assess your surfaces, walk through what’s being cleaned, and confirm expectations before any equipment comes out.
-
02
Pre-Treatment
A cleaning solution is applied to areas with organic growth and given time to dwell before rinsing.
-
03
Surface Cleaning
Calibrated commercial equipment cleans the surface evenly, without the wand lines a handheld sprayer leaves behind.
-
04
Edge and Joint Detail Work
Edges, joints, and paver lines get individual attention that a single pass with a surface cleaner misses.
-
05
Final Rinse and Walkthrough
The surface is rinsed clean and inspected with you before we consider the job finished.
-
06
Before and After Photos
Sent the same day, useful for your own records or for HOA documentation if required.
Pricing
What Does Driveway and Concrete Cleaning Cost in Jacksonville?
| Service | Typical Range |
|---|---|
| Driveway and concrete cleaning | $100 to $300 |
| Pool deck and patio cleaning | $150 to $400 |
| Paver cleaning and sealing combined | $400 to $900 |
Exact pricing depends on square footage, surface condition, and how long it’s been since the last cleaning. We confirm pricing on site before any work begins.
Schedule
How Often Should You Clean Your Driveway in Jacksonville?
At minimum once a year in Northeast Florida’s climate. Surfaces under heavy tree coverage, near landscaping that feeds algae growth, or exposed to irrigation overspray often benefit from twice a year cleaning to stay ahead of staining rather than removing it after it’s set in.
Proof of Work
Driveway and Concrete Cleaning Results
Real before and after outcomes from Jacksonville driveway and concrete cleaning jobs.
Driveway Cleaning
Oil, rust, and mildew removed from residential concrete.
Walkway & Hardscape
Algae film and organic buildup lifted from shaded concrete.
FAQ
Frequently Asked Questions
How much does driveway pressure washing cost in Jacksonville?
Most driveway cleaning runs $100 to $300, depending on size, condition, and level of staining. We provide a free, no obligation estimate before any work starts.
How long does driveway cleaning take?
A standard residential driveway typically takes one to two hours, depending on size and condition. If we’re also cleaning a patio or walkways in the same visit, we’ll give you a realistic time window upfront.
Is pressure washing safe for all concrete?
Yes, when done with calibrated equipment and the correct technique. The wrong pressure or nozzle can permanently etch or scar concrete, which is why we match pressure and technique to the specific surface rather than using one setting for every job.
Will pressure washing remove oil stains from concrete?
It depends on the stain. Fresh or moderate oil stains typically respond well to degreaser and pressure washing. Older, deeply set stains may lighten substantially but aren’t always fully removable, since the oil has penetrated below the surface.
How often should I pressure wash my driveway in Jacksonville?
At minimum once a year. Surfaces under heavy tree coverage or near landscaping that feeds algae growth often benefit from twice a year cleaning.
Do I need to be home during the cleaning?
Not necessarily. As long as we have access to an outdoor water spigot and know the area to be cleaned, most customers aren’t home during the appointment. We send before and after photos when the job is complete.
Can you clean pavers without damaging them, and should I seal them after?
Yes. Pavers are cleaned with a method matched to their material and condition. Sealing afterward isn’t required, but it protects the color and surface from UV damage and future staining, meaning the clean result lasts longer between visits.
Can you provide documentation for my HOA?
Yes. Every job includes before and after photos, which can be used as documentation if your HOA or community requires proof of completed exterior maintenance.
Explore our services: House Washing | Roof Cleaning | Driveway & Concrete | Commercial | Orange Park. Don’t see your issue listed? Call us — we’ll confirm we can help.
Ready for a cleaner driveway?
Call for a free estimate on driveway cleaning, concrete cleaning, and paver sealing in Jacksonville and the First Coast.
Call +1 (904) 871-7193